Trang chủ

Products

"Think Building Chemicals, Think VIETSTAR"

MightySeal Waterbar - An elastic PVC waterstop made from high-quality, heat-resistant, elastic polyvinyl chloride. The product is designed to prevent water seepage through construction joints, expansion joints, and settlement joints in concrete structures. MightySeal Waterbar meets the technical requirements of TCVN 9407:2014 and BS 2571.

MightySeal CP

MightySeal CP is a two-component, cement-polymer-based waterproofing system, formulated from high-quality polymers, selected cements, and other premium additives.

After mixing, MightySeal CP becomes a smooth, pliable mixture that can be easily applied with a brush, roller, or suitable spray gun.

MightySeal CP is applied to surfaces that are damp to saturation (but without standing water). The cured coating has a homogeneous structure, is flexible, durable, and adheres well to most cement and concrete surfaces.

MightySeal AC

MightySeal AC is a water-based, acrylic, elastic waterproofing coating for waterproofing, heat insulation, and building protection. The product is easy to apply on both horizontal and vertical surfaces, forming a seamless, hydrophobic, elastic membrane with high UV resistance and mechanical stress resistance. Apply MightySeal AC with a brush, roller, or spray gun in a minimum of two coats. The number of coats depends on actual requirements.

MightySeal PU W

MightySeal PU W is an elastic, water-based modified aliphatic polyurethane coating for waterproofing and protecting structures. The product is easy to apply on both horizontal and vertical surfaces, forming a seamless, hydrophobic, elastic membrane with high resistance to ultraviolet (UV) rays and mechanical stress. Apply MightySeal PU W with a brush, roller, or spray gun in a minimum of two coats. The number of coats depends on actual requirements.

MightySeal US Primer

MightySeal US Primer is a one-component, low-viscosity polyurethane primer suitable for a wide variety of substrates. The product cures upon contact with moisture.

HYPERSILICA™ 92U

HYPERSILICA™ 92U is a highly reactive, ultra-fine, non-compressed silica fume (also known as microsilica) mineral additive. Its main component is amorphous spherical SiO2 mineral obtained during the arc production of silica and silica alloys from quartz.

The average particle size of HYPERSILICA™ 92U is approximately 5 microns, which is 100 times smaller than cement particles.

HYPERSILICA™ 92U conforms to the following standards: US ASTM C-1240; Canada CAN/CSA-A23.5, Europe EN 13263, Japan JIS A6207, Korea KS F2567, China GB/T18736, and Vietnam TCVN 8827.

VINMASTIC®

VINMASTIC is produced from high quality bitumen, modified with special agents. It is dark, hot - applied. VINMASTIC meets requirements of ASTM D1190, ASTM D6690 và TCVN 9974.

HYPERFLOOR® QH

HYPERFLOOR® QH is a dry shake, ready-mix powder mixture, use for increasing hardness of concrete floor surface. The product is manufactured from high quality selected natural quartz sand, cement, additives